2009-2014 F-150 with black running boards sunset

Affiliate Disclosure: TruckBench participates in affiliate programs including Amazon Associates. If you purchase through our links, we may earn a small commission at no extra cost to you. This does not affect our recommendations — we only feature products we’d put in our own trucks.


Top 10 Running Boards & Side Steps for the 2009–2014 Ford F-150

Updated: February 2025 | Reviewed by the TruckBench Team

The 2009–2014 Ford F-150 (P415 platform) is a steel-body truck with frame and body mounting points specific to this generation. Running boards protect the P415’s steel rocker panels from road debris that chips paint and eventually causes rust — a more pressing concern on this generation than on the aluminum-body 2015+ truck. Always confirm 2009–2014 (P415) compatibility before ordering.


Quick Picks

  1. AMP Research PowerStep XL — Best Overall
  2. N-Fab Nerf Steps — Best Nerf Bar
  3. Rough Country Oval Nerf Bars — Best Value
  4. Ford OEM Running Boards — Best OEM
  5. Westin Pro Traxx 5 Oval Bars — Best Mid-Range
  6. Tyger Auto 5″ Oval Side Steps — Best Budget
  7. Go Rhino RB10 Running Boards — Best Heavy-Duty
  8. Lund 5″ Oval Curved Nerf Bars — Best Mid-Range Nerf
  9. AMP Research PowerStep Xtreme — Best for Lifted Trucks
  10. Ionic Pro Stainless Oval Bars — Best Polished Look

#1: AMP Research PowerStep XL — Best Overall

Rating: ★★★★★ | Badge: Editor’s Choice

“Fully automatic power-deployable steps that retract flush when driving — the best experience on a P415 F-150 used daily by a range of passengers.”

AMP Research’s PowerStep XL automatically extends when any door opens and retracts flush against the rocker panel when closed. The XL features a wider 14-inch step pad over the standard 12.5 inches. Aluminum construction, weather-sealed motors, plug-and-play wiring into the P415’s factory door sensor circuit. Available for SuperCab and SuperCrew. 3-year warranty.

Specs at a Glance:

FeatureDetail
StylePower Retractable
MaterialAluminum
Step Pad Width14 inches
OperationAuto-deploy on door open
Cab StylesSuperCab, SuperCrew
Warranty3 Year

Pros: Fully automatic — Maximum ground clearance when retracted — Wide 14″ step pad — Plug-and-play wiring — Well-established P415 fitment history

Cons: Premium price — Electrical complexity — Professional install recommended — Confirm P415 SKU

Price: ~$890–$1,080 depending on cab

Check Price on Amazon → | AMPResearch.com →


#2: N-Fab Nerf Steps — Best Nerf Bar

Rating: ★★★★★ | Badge: Best Nerf Bar

“Clean tube steps with one of the most durable powder coat finishes in the category — no-drill frame mounting for the P415.”

N-Fab’s nerf steps use a 3-inch round tube profile with textured powder coat that resists chipping far better than typical nerf bar finishes. No-drill frame mounting. Available in gloss black, textured black, and polished stainless for all P415 cab styles. Limited lifetime warranty.

Specs at a Glance:

FeatureDetail
StyleNerf Bar
Tube Diameter3 inches
MaterialSteel
FinishTextured Black / Gloss / SS
InstallNo-drill frame mount
WarrantyLimited Lifetime

Pros: Aggressive look — Extremely durable powder coat — Multiple finish options — No-drill — Lifetime warranty

Cons: Narrower step than running boards — Less rocker panel coverage

Price: ~$350–$500 depending on cab and finish

Check Price on Amazon → | N-Fab.com →


#3: Rough Country Oval Nerf Bars — Best Value

Rating: ★★★★☆ | Badge: Best Value

“An aggressive 4-inch oval at a budget price — a natural pairing for a P415 already running Rough Country’s lift kit.”

Rough Country’s oval nerf bars deliver an aggressive look at a price well below premium brands. Black powder coat, textured non-slip step pads, P415-specific no-drill brackets. Lifetime warranty.

Specs at a Glance:

FeatureDetail
StyleOval Nerf Bar
Tube Size4-inch oval
MaterialSteel
FinishBlack Powder Coat
InstallNo-drill bolt-on
WarrantyLimited Lifetime

Pros: Low price — No-drill — Textured pads — Lifetime warranty — Natural RC ecosystem fit

Cons: Thinner steel — Finish shows wear faster than N-Fab — Confirm P415 fitment

Price: ~$150–$220 depending on cab

Check Price on Amazon → | RoughCountry.com →


#4: Ford OEM Running Boards — Best OEM

Rating: ★★★★☆ | Badge: OEM Pick

“Designed alongside the P415 — the cleanest integration with the factory steel body lines.”

Ford’s factory running boards for the 2009–2014 F-150 attach to P415 factory hard points and match the body lines exactly. Wide step surface, non-slip texture, composite finish. Available through Ford dealers and Amazon. Confirm P415 SKU — these differ from 2015+ OEM boards.

Specs at a Glance:

FeatureDetail
StyleOEM Running Board
GenerationP415 (2009–2014) specific
FitmentFactory hard points
Step SurfaceWide, textured
FinishBlack composite
SourceFord Dealers / Amazon

Pros: Perfect P415 fitment — Matches body lines — Factory mounting — OEM appearance

Cons: Premium OEM pricing — Limited style customization — Confirm P415 SKU

Price: ~$380–$600 / set

Check Price on Amazon →


#5: Westin Pro Traxx 5 — Best Mid-Range

Rating: ★★★★☆ | Badge: Best Mid-Range

“A meatier 5-inch oval tube with more step surface area — polished SS option pairs well with chrome trim on Lariat and King Ranch P415 builds.”

Westin’s Pro Traxx 5 provides more step surface area than standard nerf bars. Polished stainless or black powder coat finishes, P415-specific bracket mounting without drilling. Limited lifetime warranty.

Specs at a Glance:

FeatureDetail
StyleOval Tube Step
Tube Size5-inch oval
MaterialStainless / Steel
FinishPolished SS or Black
InstallNo-drill frame mount
WarrantyLimited Lifetime

Pros: Wide 5-inch oval — Polished SS option — No-drill — Lifetime warranty

Cons: Polished requires maintenance — Heavier than aluminum — Confirm P415 fitment

Price: ~$275–$415 depending on finish and cab

Check Price on Amazon → | WestinAutomotive.com →


#6: Tyger Auto 5″ Oval — Best Budget

Rating: ★★★★☆ | Badge: Best Budget

“Sharp-looking 5-inch oval steps for under $200 — Tyger’s value formula delivers on the P415 F-150.”

Tyger’s budget oval steps have a clean black powder coat finish, well-positioned step pads, and P415-specific no-drill brackets. 1-year warranty.

Specs at a Glance:

FeatureDetail
StyleOval Tube Step
Tube Size5-inch oval
MaterialSteel
FinishBlack Powder Coat
InstallNo-drill bolt-on
Warranty1 Year

Pros: Very affordable — Good-looking 5-inch profile — No-drill — P415 brackets — Wide textured pads

Cons: Thinner steel — 1-year warranty — Finish wears faster in harsh climates

Price: ~$135–$200 depending on cab

Check Price on Amazon →


#7: Go Rhino RB10 — Best Heavy-Duty

Rating: ★★★★★ | Badge: Best Heavy-Duty

“Full-length rocker panel coverage in heavy-gauge steel — the right choice for protecting the P415’s steel body from the rust-causing chips that accumulate over time.”

Go Rhino’s RB10 boards are heavy-gauge steel with textured black powder coat, nearly 5 inches of flat step area, and full-length rocker panel coverage on SuperCrew models. Deep texture handles mud and wet boots. Limited lifetime warranty.

Specs at a Glance:

FeatureDetail
StyleFull-Length Running Board
MaterialHeavy-Duty Steel
Step Width~5 inches
FinishTextured Black
CoverageFull rocker panel
WarrantyLimited Lifetime

Pros: Extremely durable — Full rocker coverage — Wide flat step — Deep texture — Lifetime warranty — Critical rust protection for steel body

Cons: Heavier than most options — Aggressive look — Confirm P415 fitment

Price: ~$430–$600 depending on cab

Check Price on Amazon → | GoRhino.com →


#8: Lund 5″ Oval Curved — Best Mid-Range Nerf

Rating: ★★★★☆ | Badge: Best Mid-Range Nerf

“A gentle curve following the P415’s lower body line — a more integrated look than straight tube options.”

Lund’s curved oval bars follow the body contour. Stainless pairs with chrome trim on upper P415 trims; black suits off-road builds. Large textured step pads, no-drill mounting. Limited lifetime warranty.

Specs at a Glance:

FeatureDetail
StyleCurved Oval Nerf Bar
Tube Size5-inch oval
MaterialStainless / Steel
FinishPolished SS or Black
InstallNo-drill bracket
WarrantyLimited Lifetime

Pros: Curved body-line design — Polished SS option — Large step pads — No-drill — Lifetime warranty

Cons: Polished needs regular cleaning — Confirm P415 fitment

Price: ~$240–$360 depending on finish and cab

Check Price on Amazon →


#9: AMP Research PowerStep Xtreme — Best for Lifted

Rating: ★★★★★ | Badge: Best for Lifted

“Purpose-built for the extra ride height of a lifted P415 F-150 — drops lower and extends further than the standard PowerStep.”

The PowerStep Xtreme drops lower and extends further outboard than the standard PowerStep, bridging the larger gap on a lifted P415 F-150. Same auto-deploy/retract operation. 3-year warranty.

Specs at a Glance:

FeatureDetail
StylePower Retractable (Lifted)
MaterialAluminum
Extended DropGreater than standard PowerStep
OperationAuto-deploy on door open
Best For2″–6″ lifted P415 F-150
Warranty3 Year

Pros: Built for lifted trucks — Auto-deploy/retract — Greater drop — Wide textured pad — Maintains ground clearance retracted

Cons: Most expensive — Professional install — Overkill for stock height — Confirm P415 fitment

Price: ~$1,050–$1,300 depending on cab

Check Price on Amazon → | AMPResearch.com →


#10: Ionic Pro Stainless — Best Polished Look

Rating: ★★★★☆ | Badge: Best Polished Look

“Mirror-polished stainless that complements chrome accents on a Lariat or King Ranch P415 F-150.”

Ionic Pro’s mirror-polished stainless oval bars are the show-quality option for the P415 F-150. P415-specific brackets, no-drill installation, textured step pads. Lifetime warranty.

Specs at a Glance:

FeatureDetail
StyleOval Tube Step
Tube Size5-inch oval
MaterialMirror-Polished Stainless
FinishMirror Polish
InstallNo-drill bracket
WarrantyLimited Lifetime

Pros: Best polished finish — Pairs with chrome trim — No-drill — Stainless durability — Lifetime warranty

Cons: Regular polishing required — Shows water spots — Not for off-road/muddy use — Confirm P415 fitment

Price: ~$215–$315 depending on cab

Check Price on Amazon →


P415 F-150 Running Board Buying Guide

Confirm P415 (2009–2014) Generation

The P415 uses different frame mounting points from the 2015+ P552 generation. Always confirm 2009–2014 compatibility before ordering.

Rust Protection on the Steel Body

Unlike the 2015+ aluminum-body truck, the P415 has a traditional steel body. Road debris chips the paint and eventually causes rust, particularly on the rocker panels. Full-length running boards like the Go Rhino RB10 offer the most comprehensive rocker panel protection — especially important on a truck at this age where rust prevention is critical for maintaining value.

Know Your Cab Configuration

Regular Cab, SuperCab, and SuperCrew require different board lengths. Always order for your specific cab style.

Lifted P415 Considerations

Lifted P415 F-150s create a significantly larger step gap. AMP Research’s PowerStep Xtreme is purpose-built for this. For fixed bars, verify step pad height against your specific ride height.

Five Step Styles

Power Retractable — Auto-deploys on door open, retracts closed. Best daily use experience.

Full-Length Running Boards — Wide flat boards along full rocker panel. Best rocker protection and passenger convenience.

Oval Tube Steps (5″) — Most popular style. Good balance of looks, function, and price.

Nerf Bars (3″) — Narrower, more aggressive off-road look.

Curved Nerf Bars — Body-line-following curve for more integrated appearance.


Prices are approximate and subject to change. Always confirm P415 (2009–2014) compatibility and cab configuration before ordering. Replace YOURTAG-20 with your Amazon Associates tag. TruckBench earns from qualifying Amazon purchases.

Leave a Reply

Quote of the week

"People ask me what I do in the winter when there's no baseball. I'll tell you what I do. I stare out the window and wait for spring."

~ Rogers Hornsby

Designed with WordPress

Discover more from TruckModReviews

Subscribe now to keep reading and get access to the full archive.

Continue reading