Affiliate Disclosure: TruckBench participates in affiliate programs including Amazon Associates. If you purchase through our links, we may earn a small commission at no extra cost to you. This does not affect our recommendations — we only feature products we’d put in our own trucks.
Top 10 Running Boards & Side Steps for the 2022–2026 Toyota Tundra
Updated: February 2025 | Reviewed by the TruckBench Team
The 2022–2026 Toyota Tundra (XK70) sits tall by half-ton standards — particularly on TRD Pro, TRD Off-Road, and lifted builds — making running boards and side steps a practical necessity for shorter passengers and a smart rocker panel protection measure for everyone. The XK70 uses a completely new frame and body design with different bracket mounting points than the previous generation, so always confirm 2022+ fitment.
We’ve ranked the top 10 across power retractable, nerf bars, oval tube steps, and full-length running boards — covering both Double Cab and CrewMax configurations throughout.
Quick Picks — Jump to Your Favorite
- AMP Research PowerStep XL — Best Overall
- N-Fab Nerf Steps — Best Nerf Bar
- Rough Country Oval Nerf Bars — Best Value
- Toyota OEM Running Boards — Best OEM Fitment
- Westin Pro Traxx 5 Oval Bars — Best Mid-Range
- Tyger Auto 5″ Oval Side Steps — Best Budget Pick
- Go Rhino RB10 Running Boards — Best Heavy-Duty
- Lund 5″ Oval Curved Nerf Bars — Best Mid-Range Nerf Bar
- AMP Research PowerStep Xtreme — Best for TRD Pro & Lifted Trucks
- Ionic Pro Stainless Oval Bars — Best Polished Look
#1: AMP Research PowerStep XL — Best Overall
Rating: ★★★★★ | Badge: Editor’s Choice
“Auto-deploy on door open and retract flush on close — the best experience on a Tundra that sits this tall, especially for families or frequent passengers.”
AMP Research’s PowerStep XL is the standout step option for the XK70 Tundra. Fully automatic power-deployable steps extend when any door opens and retract flush against the rocker panel when closed. The XL version features a wider 14-inch step pad over the standard 12.5 inches. Aluminum construction, weather-sealed motors, plug-and-play wiring into the Tundra’s factory door sensor circuit. 3-year warranty. Confirm XK70 fitment.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Power Retractable |
| Material | Aluminum |
| Step Pad Width | 14 inches (XL) |
| Operation | Auto-deploy on door open |
| Cab Styles | Double Cab, CrewMax |
| Warranty | 3 Year |
Pros: Fully automatic deployment — Maximum ground clearance when retracted — Wide 14″ step pad — Plug-and-play wiring — Works well with TRD Pro’s additional ride height
Cons: Premium price — Adds electrical complexity — Professional install for most owners — Confirm XK70 bracket fitment
Price: ~$950–$1,150 depending on cab style
Check Price on Amazon → | AMPResearch.com →
#2: N-Fab Nerf Steps — Best Nerf Bar
Rating: ★★★★★ | Badge: Best Nerf Bar
“Clean, purposeful tube steps with step pads positioned precisely for the XK70 Tundra’s cab floor height — one of the most durable finishes in the category.”
N-Fab’s nerf steps use a 3-inch round tube profile with textured powder coat that resists chipping far better than typical nerf bar finishes. Step pads are positioned for the XK70 Tundra’s cab floor height. No-drill frame mounting. Available in gloss black, textured black, and polished stainless. Confirm XK70 bracket fitment. Limited lifetime warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Nerf Bar / Tube Step |
| Tube Diameter | 3 inches |
| Material | Steel |
| Finish | Textured Black / Gloss / SS |
| Install | No-drill frame mount |
| Warranty | Limited Lifetime |
Pros: Aggressive tube-step look — Extremely durable powder coat — Multiple finish options — No-drill frame mount — Lifetime warranty
Cons: Narrower step surface than running boards — Confirm XK70 fitment — Step height may be tall for shorter passengers on stock-height Tundra
Price: ~$370–$520 depending on cab and finish
Check Price on Amazon → | N-Fab.com →
#3: Rough Country Oval Nerf Bars — Best Value
Rating: ★★★★☆ | Badge: Best Value
“An aggressive 4-inch oval profile at a budget price — a natural pairing for a Tundra already running Rough Country’s lift.”
Rough Country’s oval nerf bars deliver an aggressive look at a price well below premium brands. Black powder coat, textured non-slip step pads, Tundra-specific brackets that bolt on without drilling. Lifetime warranty. Confirm XK70 fitment.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Oval Nerf Bar |
| Tube Size | 4-inch oval |
| Material | Steel |
| Finish | Black Powder Coat |
| Install | No-drill bolt-on |
| Warranty | Limited Lifetime |
Pros: Aggressive look at a low price — No-drill installation — Solid powder coat — Textured step pads — Lifetime warranty
Cons: Thinner steel than premium brands — Finish can show wear faster than N-Fab — Confirm XK70 fitment
Price: ~$160–$240 depending on cab style
Check Price on Amazon → | RoughCountry.com →
#4: Toyota OEM Running Boards — Best OEM Fitment
Rating: ★★★★☆ | Badge: OEM Pick
“Designed alongside the XK70 — the cleanest, most seamless integration with the Tundra’s body lines.”
Toyota’s factory running boards for the 2022–2026 Tundra attach to factory hard points and match the XK70 body lines exactly. Wide step surface, non-slip texture, composite finish resisting chipping well. Available through Toyota dealers and Amazon.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | OEM Running Board |
| Generation | XK70 factory-specific |
| Fitment | Factory hard point mount |
| Step Surface | Wide, textured non-slip |
| Finish | Black composite |
| Source | Toyota Dealers / Amazon |
Pros: Perfect XK70 fitment — Matches Tundra body lines exactly — Factory mounting hard points — Maintains OEM aesthetics
Cons: Premium OEM pricing — Limited style customization — Heavier than some aftermarket options
Price: ~$420–$640 / set
#5: Westin Pro Traxx 5 Oval Bars — Best Mid-Range
Rating: ★★★★☆ | Badge: Best Mid-Range
“A meatier 5-inch oval tube with more step surface area than a standard nerf bar — a good balance for the Tundra’s tall cab entry.”
Westin’s Pro Traxx 5 provides more step surface area than a 3-inch nerf bar while maintaining the tube-step look. Polished stainless or black powder coat finishes, Tundra-specific bracket mounting without modification, grippy step pads. Limited lifetime warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Oval Tube Step |
| Tube Size | 5-inch oval |
| Material | Stainless Steel / Steel |
| Finish | Polished SS or Black |
| Install | No-drill frame mount |
| Warranty | Limited Lifetime |
Pros: Wide 5-inch oval for more step surface — Polished stainless option — No-drill installation — Lifetime warranty
Cons: Polished finish requires more maintenance — Heavier than aluminum — Confirm XK70 fitment
Price: ~$300–$450 depending on finish and cab
Check Price on Amazon → | WestinAutomotive.com →
#6: Tyger Auto 5″ Oval Side Steps — Best Budget
Rating: ★★★★☆ | Badge: Best Budget
“Sharp-looking 5-inch oval steps for under $200 — Tyger’s value formula delivers on the Tundra.”
Tyger’s budget oval steps have a clean black powder coat finish, well-positioned step pads with generous texture, and Tundra-specific brackets for bolt-on installation without drilling. 1-year warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Oval Tube Step |
| Tube Size | 5-inch oval |
| Material | Steel |
| Finish | Black Powder Coat |
| Install | No-drill bolt-on |
| Warranty | 1 Year |
Pros: Very affordable — Good-looking 5-inch oval profile — No-drill installation — Tundra-specific brackets — Wide textured step pads
Cons: Thinner steel gauge than premium — 1-year warranty — Finish may wear faster in harsh climates — Confirm XK70 fitment
Price: ~$145–$215 depending on cab style
#7: Go Rhino RB10 Running Boards — Best Heavy-Duty
Rating: ★★★★★ | Badge: Best Heavy-Duty
“Full-length rocker panel coverage in heavy-gauge steel — the right choice for a Tundra that earns its living on job sites or trails.”
Go Rhino’s RB10 boards are heavy-gauge steel with a textured black powder coat, nearly 5 inches of flat step area, and full-length rocker panel coverage on CrewMax models. Deeply textured surface handles mud and wet boots without slipping. Limited lifetime warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Full-Length Running Board |
| Material | Heavy-Duty Steel |
| Step Width | ~5 inches |
| Finish | Textured Black Powder Coat |
| Coverage | Full rocker panel |
| Warranty | Limited Lifetime |
Pros: Extremely durable heavy-gauge steel — Full rocker panel coverage — Wide flat step surface — Deep texture grip — Lifetime warranty
Cons: Heavier than most options — Aggressive look may not suit all builds — Confirm XK70 fitment
Price: ~$470–$640 depending on cab style
Check Price on Amazon → | GoRhino.com →
#8: Lund 5″ Oval Curved Nerf Bars — Best Mid-Range Nerf
Rating: ★★★★☆ | Badge: Best Mid-Range Nerf
“A gentle curve that follows the XK70 Tundra’s lower body line for a more integrated appearance than straight tube options.”
Lund’s curved oval bars follow the body contour rather than running in a straight line. Stainless option pairs with chrome trim on Platinum and 1794 Edition Tundras; black suits TRD Off-Road and off-road builds. Large textured step pads, no-drill mounting. Limited lifetime warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Curved Oval Nerf Bar |
| Tube Size | 5-inch oval |
| Material | Stainless Steel / Steel |
| Finish | Polished SS or Black |
| Install | No-drill bracket mount |
| Warranty | Limited Lifetime |
Pros: Curved design follows Tundra body lines — Polished stainless looks premium — Large textured step pads — No-drill installation
Cons: Polished finish requires regular cleaning — Confirm XK70 fitment
Price: ~$265–$400 depending on finish and cab
#9: AMP Research PowerStep Xtreme — Best for TRD Pro & Lifted Trucks
Rating: ★★★★★ | Badge: Best for TRD Pro & Lifted
“Purpose-built for the extra ride height of a TRD Pro or lifted Tundra — drops lower and extends further than the standard PowerStep.”
The PowerStep Xtreme drops lower and extends further outboard than the standard PowerStep, bridging the larger gap between ground and cab floor on a TRD Pro or lifted XK70 Tundra. Same auto-deploy/retract operation. 3-year warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Power Retractable (Lifted) |
| Material | Aluminum |
| Extended Drop | Greater than standard PowerStep |
| Operation | Auto-deploy on door open |
| Best For | TRD Pro, 2″–6″ lifted Tundras |
| Warranty | 3 Year |
Pros: Purpose-built for TRD Pro and lifted Tundras — Auto-deploy/retract — Greater drop and extension — Wide textured step pad — Maintains ground clearance when retracted
Cons: Most expensive option — Professional install — Confirm XK70 bracket fitment — Overkill for stock-height trucks
Price: ~$1,150–$1,400 depending on cab style
Check Price on Amazon → | AMPResearch.com →
#10: Ionic Pro Stainless Oval Bars — Best Polished Look
Rating: ★★★★☆ | Badge: Best Polished Look
“Mirror-polished stainless that pairs beautifully with the chrome and premium trim details on a Tundra Platinum or 1794 Edition.”
Ionic Pro’s mirror-polished stainless oval bars are the show-quality option — head-turning finish complementing chrome accents on higher Tundra trims. Tundra-specific brackets, no-drill installation, textured step pads. Lifetime warranty.
Specs at a Glance:
| Feature | Detail |
|---|---|
| Style | Oval Tube Step |
| Tube Size | 5-inch oval |
| Material | Mirror-Polished Stainless |
| Finish | Mirror Polish |
| Install | No-drill bracket mount |
| Warranty | Limited Lifetime |
Pros: Best polished finish — Pairs perfectly with Platinum/1794 chrome trim — No-drill installation — Stainless durability — Lifetime warranty
Cons: Requires regular polishing — Shows water spots — Not ideal for TRD Off-Road or muddy use — Confirm XK70 fitment
Price: ~$235–$340 depending on cab style
Toyota Tundra Running Board & Side Step Buying Guide
Confirm XK70 (2022+) Generation
The XK70 Tundra uses completely different frame mounting points and body dimensions than the 2007–2021 previous generation. Brackets designed for the older Tundra will not fit. Always confirm 2022+ (XK70, third generation) compatibility before purchasing any running board or nerf bar.
Know Your Cab Configuration
The Double Cab and CrewMax have different lengths requiring different board lengths. Always order for your specific cab style.
TRD Pro and Off-Road Package Height
The TRD Pro trim rides noticeably taller than standard Tundra trims and runs larger tires. Standard running boards and nerf bars calibrated for normal ride height may sit too high to be useful on a TRD Pro. AMP Research’s PowerStep Xtreme is purpose-built for this; for fixed bars, verify “lifted truck compatible” listings or check step pad height against your specific configuration.
The Five Step Styles
Power Retractable — Auto-deploys on door open, retracts on close. Best overall experience for the Tundra’s tall cab entry.
Full-Length Running Boards — Wide, flat boards along the full rocker panel length. Best for families and frequent passengers.
Oval Tube Steps (5″) — Most popular style. Good balance of looks, function, and price.
Nerf Bars (3″) — Narrower, more aggressive look. Less step surface.
Curved Nerf Bars — Body-line-following curve for a more integrated look.
Rocker Panel Protection
The XK70 Tundra’s rocker panels benefit from the protection of full-length running boards or wide nerf bars — road debris throws at highway speed can damage the painted lower body on any truck. Full-length boards like the Go Rhino RB10 offer the most rocker coverage.
Prices are approximate and subject to change. Always confirm XK70 (2022+) compatibility and cab configuration before ordering. Replace YOURTAG-20 with your Amazon Associates tag. TruckBench earns from qualifying Amazon purchases.
Leave a Reply